System-in-a-Sensor: Transforming the Pressure Sensor Market

2022-03-24 03:34:56 By : Ms. Annie Song

We use cookies to enhance your experience. By continuing to browse this site you agree to our use of cookies. More info.

Differential pressure sensors are a critical part of most mechanical and electromechanical devices that require the precise measurement of air, gases or liquids to determine the comparative difference between two inputs.

For example, if there is a valve in a pipe, a differential pressure sensor will measure the pressure on both sides of the valve. If the pressures do not match, then it signals that either the valve is not fully open or there is a potentially serious issue (such as a blockage).

Differential pressure sensors are a key element in many devices, such as medical ventilators, spirometers, anesthesia devices, industrial flow meters and HVAC systems.

While some variation in differential pressure sensing has existed for hundr years, today’s modern pressure sensors can trace their roots back to the late 1960s when Honeywell applied for the first patents in piezoresistive silicon sensor technology.

Over the pursuant decades, the technology has been improved by further integrating electrical and mechanical components that are manufactured using silicon processes similar to integrated circuits. This process is known as Microelectromechanical Systems or MEMS.

Today’s devices, whether it be consumer electronics such as smartphones, medical equipment such as respirators or industrial ventilation systems, have become much more intelligent. But not all components have advanced.

Critical to many applications, differential pressure sensors have changed little over the past several decades. This has resulted in product designers having to put together piece-meal solutions that are often not performance-optimized and usually extend product development timelines.

Differential pressure sensors are used in a variety of applications across a broad range of industries. While the list of uses is endless, for this article we will list some of the more common uses in the medical, industrial and HVAC industries.

Image Credit: Superior Sensor Technology

Here are some of the more common medical applications for differential pressure sensors:

Ventilators: Multiple differential pressure sensors are found in ventilators to ensure each channel is supplying the correct amount of air/gas, the right mix of air and gases are being administered, the right inflow is going to the patient and the patient’s air outflow is at appropriate levels.

Spirometers: Differential pressure sensors are used in spirometry to accurately measure a patient’s lung capacity and volume under various test conditions. These results help diagnose if there is lung disease present, and if so, what type.

CPAP/BiPAP: Differential pressure sensors are utilized in CPAP and BiPAP devices such as sleep apnea machines and nebulizers. They ensure the right mix of air/gas is going to the lungs and monitor to ensure the patient is breathing properly.

Anesthesia Machines: Differential pressure sensors ensure the right dosage of anesthesia is administered to a patient.

Oxygen Concentrators: Differential pressure sensors monitor the flow of oxygen to ensure the patient is receiving the correct amount of oxygen and is breathing properly. 

Image Credit: Superior Sensor Technology

The list of industrial applications for differential pressure sensors is quite long. Here is a partial list of how to utilize differential pressure sensors in these applications:

Image Credit: Superior Sensor Technology 

Like industrial applications, the list of HVAC applications is also quite long. Here is a partial list of how to utilize differential pressure sensors in HVAC:

The integration of many components onto a single die revolutionized the consumer electronics industry. Instead of each feature having its own integrated circuit (IC), a system-on-a-chip IC integrates these distinct functions on a single die or substrate in order to reduce power, shrink the size and lower the cost of a product. 

The first SoCs date back to the 1970s when many components were integrated into single chips to control the nascent digital watch market. This allowed the watches to be smaller in size and provide sufficient battery life.

After watches, calculators started integrating new SoCs that made the devices lighter and substantially cheaper. By the 1990s, IC companies started embedding microcontrollers with DSPs and other components into system-level chips that drove the rapid adoption of handheld devices (games, instruments, phones), peripherals and other products.

By taking the IC with the most intelligence, integrating it with other components and sharing its intelligence across these additional functions, the electronics industry entered a new era of inventiveness. 

Today, SoCs are in most electronic products from smartphones, TVs and automobiles to IoT devices and embedded systems. The ability to integrate many functions onto a single chip has led to an explosion of highly powered devices throughout all segments of the electronics industry, benefiting our daily lives.

The SoC concept is now expanding to other products that will drive the next wave of innovation, such as sensors. 

Figure 1. SoC – Smartphone AP Example. Image Credit: Superior Sensor Technology 

As most sensors detect or measure physical properties, they have not been integrated into ICs. Acting as a bridge between the analog and digital worlds, and often being location dependent, has made adding their full capability into an integrated circuit that sits on a centralized PCB extremely difficult.

However, as a standalone sensor module, we can utilize the SoC concept in creating a new generation of sensors that are more efficient, reliable, flexible and functional. 

Like SoCs, smart sensors are not a new concept. In fact, these integrations started in the 1970s in advanced IR surveillance and warning systems.

Originally commissioned by the military, the advances in computing power, component miniaturization and software algorithms are now opening up new doors for advanced sensor modules across industries and applications.

Integrating a microcontroller or DSP in the sensor module gives it the intelligence to offer additional capabilities such as self-calibration, self-identification, digitization of sensor data and wireless communications. 

Today, smart sensors are everywhere, including homes, automobiles and factories.

We have all experienced situations where a motion sensor drives lighting and/or the HVAC in a building, a distance sensor turns a camera or spotlight on and off, a water/humidity sensor instructs a sprinkler system to turn on, and an alarm sensor that sends a wireless notification in case of a breach.

This is accomplished by having the base sensor(s) directly interact with a microcontroller or DSP and a communications module. An integrated smart sensor solution is designed to work better than trying to piece-meal all the components together.

The tighter integration reduces latency, better utilizes system resources and increases overall performance. 

Figure 2. Smart Sensor Example. Image Credit: Superior Sensor Technology  

Taking it a step further, the new System-in-a-Sensor concept brings advanced capabilities that are application or use-case specific and can be adjusted even after a sensor is deployed in the field.

Much like a smartphone’s usage pattern is controlled by a user, a system-in-a-sensor’s usage pattern can be controlled either by an operator or based on system or external events. 

Most of the computing functions in a smartphone are driven by an application processor (AP) – an extremely intricate SoC controlling many of the functions of the phone including the display, applications, power and communications modules.

The AP is very intelligent, depending on what you are trying to do with the smartphone, the SoC ‘structures’ itself to optimize the performance for the desired function.

It is like a swiss army knife – depending on what you are trying to do, it pulls out the right tool so you can do it as efficiently as possible. Sensors should essentially have this same level of ingenuity.

As many sensors are powered by ASICs, microprocessors, controllers or DSPs, they can be architected to be flexible and intelligent to optimally perform different functions like an AP does on a smartphone.

Having one sensor that can be integrated into many devices and then configure itself based on the immediate need is the future of sensor technology.

This can be seen in the NimbleSense architecture deployed in Superior Sensor Technology's pressure sensor products.

One sensor can support a wide array of pressure ranges without any degradation in accuracy, and various features can be turned on and off depending on the application for its use. 

Bringing intelligence into a system-in-a-sensor implementation can provide lots of benefits. For example, by procuring the same system-in-a-sensor for numerous projects, you gain the benefit of lower inventory costs, simplified manufacturing and a more straightforward supply chain.

Manufacturers will only need to worry about building and creating an inventory of one system. This lowers inventory costs and simplifies manufacturing as the production lines do not need to be reconfigured for each product.

Furthermore, using one sensor for multiple purposes and projects, supply chain complexity can significantly be reduced by procuring a single part. The benefit of economies of scale is also provided as businesses start to ramp up. 

In addition, a sensor can be configured ‘on the fly’ to support various applications and features. This enables engineers to design their products more rapidly by integrating the same sensor in many devices and applications.

Development cycles will be shorter, and engineers can freely optimize their design throughout the development phase without the risk of having to change to a new component that can possibly cause production delays. 

Finally, overall system performance is enhanced due to the customizable capabilities of the system-in-a-sensor.

If architected correctly, like a smartphone AP, the sensor will ensure peak performance across many use cases.

This is due to the sensor being optimized for flexible general use (e.g., supporting multiple pressure ranges while maintaining the same levels of accuracy) and having the ability to turn on specific features for certain applications.

Like an SoC, the system-in-a-sensor is designed to operate at maximum capability across a wide array of applications and configurations.

Moreover, a company can quickly bring out derivatives to expand product lines and further segment its offerings since one sensor solution can be deployed to support many different products. 

For more details about the full capabilities of a System-in-a-Sensor solution, please download the NimbleSense white paper.

This information has been sourced, reviewed and adapted from materials provided by Superior Sensor Technology.

For more information on this source, please visit Superior Sensor Technology.

Please use one of the following formats to cite this article in your essay, paper or report:

Superior Sensor Technology. (2022, March 17). System-in-a-Sensor: Transforming the Pressure Sensor Market. AZoSensors. Retrieved on March 23, 2022 from

Superior Sensor Technology. "System-in-a-Sensor: Transforming the Pressure Sensor Market". AZoSensors. 23 March 2022. <>.

Superior Sensor Technology. "System-in-a-Sensor: Transforming the Pressure Sensor Market". AZoSensors. (accessed March 23, 2022).

Superior Sensor Technology. 2022. System-in-a-Sensor: Transforming the Pressure Sensor Market. AZoSensors, viewed 23 March 2022,

Do you have a question you'd like to ask regarding this article?

AZoSensors speaks with Niraj K. Jha from the Electrical and Computer Engineering faculty at Princeton University. This interview explores the research proposing a framework called CovidDeep. CovidDeep combines efficient deep neural networks with commercially available wearable medical sensors for pe

This International Women's Day, we speak with Dr. NAko Nakatsuka, a Senior Scientist at ETH Zurich's Laboratory of Biosensors and Bioelectronics.

AZoSensors speaks with Kaylee Hakkel from MantiSpectra, a vertically-integrated spin-off of the Eindhoven University of Technology, about her research into developing a near-infrared sensor that dramatically simplifies spectral sensing.

State-of-the-art Polytec QTec Scanning Vibrometers for vibration measurements in the field of research and development.

The SV600 fixed acoustic imager allows the user to detect air and gas leaks or changes in sound signatures.

The PaveScan RDM is a non-destructive asphalt density testing instrument. It provides portable, quick and reliable testing. - An AZoNetwork Site

Owned and operated by AZoNetwork, © 2000-2022